Specifications

ASUS P5M2 Series
5-41
6. Repeat step 5 to add the other disks to the volume.
7. When done, press <C> to create the array, then select
Save changes then
exit this menu.
Create and save new array?
ExittheCongurationUtilityandReboot
CancelExit
Savechangesthenexitthismenu
Discardchangesthenexitthismenu
8. The utility creates the array.
LSILogicMPTSetupUtility  v6.05.06.00(2006.01.16)
Processing...maytakeupto1minute
Creating RAID Arrow ...
5.5.4 Managing Arrays
The LSI Logic MPT Setup Utility allows you to perform other tasks related to
conguring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Vie win g v olu me pro per tie s
To view volume properties
1. On the main menu, select RAID Properties.
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item -/+ = Change Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
 PCIAddress(Bus/Dev/Func)05.03.00
 MPTFirmwareRevision1.15.00.00-IR
 SASAddress500E0180:60831008
 NVIDIAVersion25.02
Status Disabled
Boot Order 0
Boot Support (Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties