Specifications
5-40
Chapter 5: RAID configuration
4. The Select New Array screen appears.
Use the arrow keys to select
Create IS Volume, then press <Enter>.
5. The
Create New Array screen shows the disks you can add to make up
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID
array.
• The disk is not large enough to mirror existing data on the primary
drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
Esc=ExitMenuF1/Shift+1=Help
Enter = Choose array type to create
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume Create Integrated Mirror Array of 2
disksplusanoptionalhotspare.Data
ontheprimarydiskmaybemigrated.
Create IME Volume Create Integrated Mirrored Enhanced
Arrayof3to8disksincludingan
optional hot spare.
ALL Data onarraydiskswillbedeleted!
Create IS Volume Create Integrated Striping array of
2to8disks.
ALL Data onarraydiskswillbedeleted!
Esc=ExitMenuF1/Shift+1=Help
SPACE/+/-=SelectdiskforarrayorhotspareC=Createarray
LS I Lo gi c Co nf i g U ti l it y v 6 . 0 8 . 0 5 . 0 0 (2 0 0 6 . 0 8 . 0 2 )
Create New Array -- SAS1068
Array Type: IM
Array Size(MB): ------
SlotDeviceIdentierRAIDHotDrivePredSize
Num DiskSprStatusFail(MB)
0 SEAGATEST373454SS0003[Yes][NO]----------70007
1 SEAGATEST373454SS0003
[NO][NO]----------70007
2 SEAGATEST373454SS0003
[Yes][NO]----------35003
3 SEAGATEST373454SS0003
[Yes][NO]----------35003