Specifications

5-36
Chapter 5: RAID configuration
Esc=ExitMenuF1/Shift+1=Help
SPACE/+/-=SelectdiskforarrayorhotspareC=Createarray
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Create New Array Type -- SAS1068
M -Keepexistingdata,migratetoanIMarray.
 Synchronizationofdiskwilloccur.
D -Overwriteexistingdata,createanewIMarray.
 ALLDATAonALLdiskinthearraywillbeDELETED!!
No Synchronization performed.
7. A conrmation screen appears.
Press <M> to keep existing data on the rst disk. If you choose this option,
data on the rst disk will be mirrored on the second disk that you will add to
the volume later. Make sure the data you want to mirror is on the rst disk.
Press <D> to overwrite any data and create the new IM array.
8. Repeat steps 5 and 6 to add the second disk to the volume.
9. When done, press <C> to create the array, then select
Save changes then
exit this menu.
10. The utility creates the array.
Create and save new array?
CancelExit
Savechangesthenexitthismenu
Discardchangesthenexitthismenu
ExittheCongurationUtilityandReboot
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Processing...maytakeup1minute
Creating RAID array