Specifications

ASUS P5M2 Series
5-35
Esc=ExitMenuF1/Shift+1=Help
Enter = Choose array type to create
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Select New Array Type -- SAS1068
Create IM Volume CreateIntegratedMirrorArrayof2disks
plus an optional hot spare. Data on the
primarydiskmaybemigrated.
Create IME Volume Create Integrated Mirrored Enhanced Array
of3to8disksincludinganoptionalhot
spare.ALLDATAonarraydiskswillbe
DELETED!
Create IS Volume Create Integrated Stripping array of 2
to8disks.
ALLDATAonarraydiskswillbeDELETED!
6. The Create New Array screen shows the disks you can add to make up
the IM volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
You may also specify the Hot Spare disk here. Select the disk, then move the
cursor to the Hot Spr column, then press <+>, <->, or <Space>.
Esc=ExitMenuF1/Shift+1=Help
SPACE/+/-=SelectdiskforarrayorhotspareC=Createarray
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Create New Array -- SAS1068
Array Type: IM
Array Size(MB): ------
SlotDeviceIdentierRAIDHotDrivePredSize
Num DiskSprStatusFail(MB)
0 SEAGATEST373454SS0003[NO][NO]----------70007
1 SEAGATEST373454SS0003
[NO][NO]----------70007
2 SEAGATEST373454SS0003
[NO][NO]----------35003
3 SEAGATEST373454SS0003
[NO][NO]----------35003
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a
RAID array.
• The disk is not large enough to mirror existing data on the
primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.