Specifications

5-34
Chapter 5: RAID configuration
3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
4. The
Adapter Properties screen appears.
Use the arrow keys to select
RAID Properties, then press <Enter>.
The numbers of the channel depend on the controller.
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item -/+ = Change Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCIAddress(Bus/Dev/Func) 05.03.00
MPTFirmwareRevision 1.15.00.00.IR
SASAddress 500E0180:60831008
NVIDIAVersion 25.02
Status Disabled
Boot Order 0
Boot Support
Enabled OS only
RAID Properties
SAS Topology
Advanced Adapter Properties
5. The Select New Array Type screen apprears.
Use the arrow keys to select
Create IM Volume, then press <Enter>.
Esc=ExitMenuF1/Shift+1=Help
Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Adapter List Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot
SAS1068 050300001.15.00.00-IRDisabled0