Specifications

5-28

Chapter 5: RAID configuration

5.3.3 Creating a RAID 10 set (Stripe + Mirror)

To create a RAID 10 set:

1. From the utility main menu, select

1. Create RAID Volume, then press

<Enter>. This screen appears.

Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7RwRAID5

[ CREATE ARRAY MENU ]

[ DISK/VOLUME INFORMATION ]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and

cannot contain special characters.

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume1

RAID10(RAID0+1)

SelectDisks

128KB

0.0 GB

Create Volume

[↑↓]-Select [ESC]-Exit[ENTER]-SelectMenu

2. Enter a name for the RAID 10 set, then press <Enter>.

3. Highlight RAID Level, press the up/down arrow key to select

|RAID 10

(RAID0+1), then press <Enter>.

4. Follow steps 4 to 9 of section “5.3.1 Creating a RAID 0 set (striped)” to create

the RAID 10 set.