Specifications

5-4
Chapter 5: RAID configuration
Menu Description
Congure
Allows you to create RAID 0 or RAID 1 set using the Easy
Conguration or the New Conguration command. This menu
also allows you to view, add, or clear RAID congurations or
select the boot drive
Initialize Allows you to initialize the logical drives of a created RAID set
Objects
Allows you to initialize logical drives or change the logical drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency
Allows you to check the data consistency of the logical drives
of a created RAID set
5.2.1 Creating a RAID 0 or RAID 1 set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or
RAID 1 set using two types of congurations: Easy and New.
In Easy Conguration, the logical drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In New Conguration, you manually set the logical drive parameters and assign the
set size and stripe size (RAID 1 only).
Us ing Ea sy Con fig ura tio n
To create a RAID set using the Easy Conguration option:
1. From the utility main menu, highlight
Congure, then press <Enter>.
2. Use the arrow keys to select
Easy Conguration, then press <Enter>.