LS201 Series Series LCD Monitor User Guide
E3040 First Edition V1 January 2007 Copyright © 2007 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety information....................................................................................... vi Care & Cleaning ......................................................................................... vii Chapter 1: Product introduction 1.1 Welcome! ..................................................................................... 1-1 1.3 Monitor introduction.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • • • • • • • • • • • • • • Before setting up the monitor, carefully read all the documentation that came with the package. To prevent fire or shock hazard, never expose the monitor to rain or moisture. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • • • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. 2. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation, such as warranty card, that may have been added by your dealer. These documents are not part of the standard package.
viii
1.1 Welcome! Thank you for purchasing the ASUS® LS201 Series LCD monitor! The latest LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the LS201 Series brings you! 1.
1.3 Monitor introduction 1.3.1 Front view Light In Motion Stand 1 1. • • • 2. 3. 4. • • 3 4 5 button: Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. Exit the OSD menu or go back to the previous menu as the OSD menu is active. Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only).
5. • • Power button / power indicator Press this button to turn the monitor on/off The color definition of the power indicator is as the below table. Status Blue Amber OFF 6. Description ON Standby mode OFF Light In Motion function The function indicates the status of the monitor. The color definition of the light is as the above table. You can turn on/off this function through the OSD menu. 1.3.2 Back view Rear connectors 1 2 3 Rear connectors (from left to right) 1. VGA port.
1- Chapter 1: Product introduction
2.1 Unfolding the monitor The monitor is folded in the package. To unfold the monitor, hold the back cover and press the Button with one hand, and carefully tilt the monitor forward with the other hand until the Button rebounds with a click. -5º~20º Button 2.2 1. • • Connecting the cables Connect the cables as the following instructions: To connect the power adapter: first, connect the adapter cord securely to the monitor’s DC-in port.
2.3 • • • Adjusting the monitor For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. Hold the stand to prevent the monitor from falling when you change its angle. You can adjust the monitor’s angle from -5º to 20º. -5º~20º It is normal that the monitor slightly shakes while you adjust the the viewing angle. 2.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. and to navigate through the functions. Highlight and activate Press the desired function by pressing the MENU button. If the selected function has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. 2. 3. and Press 4. to change the settings of the selected function.
2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), ASCR, and focus (VGA only) from this main function. • • • • • • • 3. Brightness: the adjusting range is from 0 to 100. activate this function. is a hotkey to Contrast: the adjusting range is from 0 to 100. Sharpness: the adjusting range is from 0 to 100. Saturation: the adjusting range is from 0 to 100.
4. Input Select In this function, you can select either VGA or DVI input source. (Only for some models) 5. System Setup Allow you to adjust the system. • Light In Motion: turns on/off this special function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 100. In the OSD Timeout selection, you can adjust the OSD timeout from 10 to 120. • • • • Volume: the adjusting range is from 0 to 100.
3.2 Specifications summary Panel Type Panel size Protection Glass (Anti-reflection (<2%), 9H hardness) Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Max.) Viewing angle (CR ≥ 10) Display colors Response time SPLENDID™ Video Enhancement SPLENDID™ selection Color temperature selection Skin-Tone selection Digital input Analog input Chassis Color Power LED VESA wall mount Tilt Kensington lock Voltage rating Power consumption Dimension (W x H x D) Weight (Esti.
3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no • Check if the monitor and the computer are screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.4 Supported operating modes Display resolution Horizontal frequency Refersh rate 640 x 350 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 870 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 1400 x 1050 1400 x 1050 31.5KHz 31.5KHz 31.5KHz 35.0KHz 37.9KHz 37.5KHz 31.5KHz 35.1KHz 37.9KHz 46.7KHz 48.1KHz 49.7KHz 48.4KHz 56.5KHz 58.1KHz 60.0KHz 67.5KHz 68.7KHz 63.4KHz 79.97KHz 55.
