User Guide

2 ASUS K7M-RM Motherboard
R
K7M-RM Slot A Motherboard
MB SETTINGS
K7M-RM
2) Onboard Audio Setting (AUDIOCODEC)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary AMR on the AMR slot. If using
an ISA or PCI audio expansion card, Onboard AC’97 Audio Controller in I/O
Device Configuration of the BIOS must also be disabled.
NOTE: This setting is available only on motherboards with the onboard audio option.
Setting AUDIOCODEC
Enable [1-2] [1-2] [1-2] [1-2] (default)
Disable [2-3] [2-3] [2-3] [2-3]
K7M-RM Audio Codec Setting
Enable
Onboard
Audio Codec
1
2
3
1
2
3
SPK
ADN#
AUD_EN2
AUD_EN1
SPK AUD_EN2
Disable
Onboard
Audio Codec
PARALLEL PORT
010101
K7M-RM
ADN#
AUD_EN1
3) Voltage Regulator Output Setting (VID1, VID2, VID3)
This jumpers allow you to manually adjust the CPU core voltage. It is recom-
mended to use CPU Default as the CPU core voltage. CPU Default means the
Vcore is generated according to the CPU VID configuration. For each jumper
setting, there are two voltage options, depending on the CPU used.
K7M-RM CPU Core Voltage
Selection
1.9/1.95Volts
1.8/1.85Volts
1.6/1.65Volts
1.4/1.45Volts 1.3/1.35olts
CPU Default
2/2.05Volts
1.5/1.55Volts
VID2
VID3
VID1
1.7/1.75Volts
VID2
VID3
VID1
VID2
VID3
VID1
3214 3214 3214
3214 3214 3214
3214 3214 3214
PARALLEL PORT
010101
K7M-RM