User Guide

ASUS KN97-X User’s Manual 23
III. INSTALLATION
(CPU)
III. INSTALLATION
From the Manufacturer:
Four screws should be showing next to each corner of the SEC Slot using two At-
tach Mount Bridges from the underside of the motherboard. A bottom Heatsink
Support Base should be mounted over the two chipsets in front of the slot.
Screw from
Mount Bridge (1&2
)
Heatsink Support
Base Pin (5&6)
Pentium II
processor SEC slo
t
View of the KN97-X Motherboard from the Manufacturer
Support Base (7)
Installing the Pentium II Processor:
1. Mount the Pentium II Retention Mechanism: Place the Retention Mecha-
nism over the SEC Slot with the Retainer’s Lock Holes toward the motherboard’s
memory slots and screw the Captive Nuts using a Phillips or flat head screw
driver. WARNING: Excessive torque may damage your motherboard.
Tighten captive nuts to no more than 6
± 1 inch/pound.
Lock Holes
Retention Mechanism in place and Captive Nut being tightened
(3)
Captive Nut