User Guide

ASUS KN97-X User’s Manual 15

III. INSTALLATION

Jumper Settings

1. Onboard Multi-I/O Selection (IOEN)

You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-

lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-

able all Multi-I/O items at once with the following jumper in order to use your

own Multi-I/O card.

Multi-I/O IOEN

Enable [1-2] (Default)

Disable [2-3]

Multi I/O Setting (Enable / Disable)

Disabled

Enable (Default)

IOEN

123

IOEN

2. Flash ROM Boot Block Programming (BBLKW)

This sets the operation mode of the boot block area of the Programmable Flash

ROM to allow programming in the Enabled position. This is required only if

prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.

Programming BBLKW

Disabled/Protect [1-2] (Default)

Enabled [2-3]

Boot Block Programming (Disable / Enable)

Enabled / Program

BBLKW

Disabled / Protected

(Default)

BBLKW

123

III. INSTALLATION

(Jumpers)