User Manual

4-24
第四章：BIOS 程序設置
VGA ROM BOOT PRIORITY [PCIE VGA CARD]
本項目用來選擇作為首要啟動設備的顯示控制器。設置值有：[PCIE VGA
CARD] [ONBOARD VGA]
Debug Option
Memory Decode on Sec. GFX [Disabled]
設置值有：[Disabled] [Force]
IOC Peer-to-Peer Mode [Auto]
設置值有：[Auto] [Default] [Mode 1] [Mode 2]
Northbridge interrupt pin [Disabled]
設置值有：[Disabled] [Enabled]
4.4.3 內置設備設置（Onboard Devices Configuration）
本菜單允許您對於內置設備進行高級設置。選擇您要設只的項目然後按下
<Enter> 鍵顯示設置選項。
BIOS SETUP UTILITY
Advanced
Onboard Devices Conguration
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Onboard LAN1 Chip [Enabled]
Onboard LAN2 Chip [Enabled]
Onboard LAN1 Boot [PXE]
Onboard LAN2 Boot [PXE]
Allows BIOS to Select
Serial Port1 Base
Addresses.
Serial Port1 Address [3F8/IRQ4]
本項目允許您選擇串口 1 的基地址。設置值有：[Disabled] [3F8/IRQ4]
[3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
本項目允許您選擇串口 2 的基地址。設置值有：[Disabled] [2F8/IRQ3]
[3E8/IRQ4] [2E8/IRQ3]
Onboard LAN1/2 Chip [Enabled]
本項目允許您開啟或關閉內置 L A N1/2 芯片。設置值有：[D isabled]
[Enabled]
Onboard LAN1/2 Boot [PXE]
本項目允許您設置內置 LAN1/2 啟動模式。設置值有：[Disabled] [PXE]
[iSCSI]