User Manual

4-10
第四章：BIOS 程序設置
4.3 主菜單（Main）
當您進入 BIOS 設置程序時，首先出現的第一個畫面即為主菜單，內容如
下圖。
4.3.1 System Time [xx:xx:xx]
設置系統的時間。
4.3.2 System Date [Day xx/xx/xxxx]
設置您的系統日期。
請參閱“4.2.1 BIOS 程序菜單介紹”一節來得知如何操作與使用
本程序。
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Server Power Boot Tools Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a eld.
Use [+] or [-] to
congure system Date.
System Time [17:44:30]
System Date [Mon, 05/31/2010]
SATA 1 : [ST3160812AS]
SATA 2 : [Not Detected]
SATA 3 : [Not Detected]
SATA 4 : [Not Detected]
SATA 5 : [Not Detected]
SATA 6 : [Not Detected]
Storage Conguration
System Information
←→ Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
4.3.3 SATA1—6
進入【設置】後，BIOS 會自動偵測是否有 IDE/SATA 設備。每個 IDE/
SAT A 設備均有單獨的子菜單。選擇一個項目並按 ＜E nte r＞ 鍵來顯示
SATA 設備信息。
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
SATA1
Device :Hard Disk
Vendor :xxxxxxxxx
Size :xx.xGB
LBA Mode :Supported
Block Mode:16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
LBA/Large Mode [Auto]
Block(Multi-Sector Transfer)M [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Enabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Disabled: Disabled LBA
Mode.
Auto: Enables LBA
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.