User Manual

華碩 KGN(M)H-D16 主板用戶手冊
6-5
6.1.2 安裝 RAID 控制器驅動程序
在 Windows
®
Server 操作系統下
在 Windows
®
Server 操作系統安裝過程中：
請依照以下步驟在 Windows
®
操作系統安裝過程中安裝 RAID 控制器驅
動程序：
1. 使用 Windows
®
操作系統安裝光盤啟動系統。進入 Windows Setup 安
裝畫面。
2.
當屏幕下端出現“Press F6 if you need to install a third party SCSI or
RAID driver...”（若需要安裝第三方 SCSI 或 RAID 驅動程序時，請按
F6 鍵...）的信息時，請按下 <F6> 鍵。
3.
此時出現下一個畫面。按下 <S> 鍵來指定一個額外的設備。
Press F6 if you need to install a third party SCSI or RAID driver...
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, DVD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.