User Manual

Chapter 5: WebPAM
83
You can set up a Rebuild to:
• Begin immediately (on demand).
• Begin at the time and date you specify. See page 84.
• Begin automatically when you replace the failed physical drive. See page 85.
• Begin automatically using a hot spare drive. See page 85.
• Begin automatically using a free drive. See page 86.
On Demand
To rebuild a logical drive:
1. Click the Logical Drive View icon in Tree View.
2. Click the Logical Drive icon of the logical drive you want to rebuild.
3. Click the Rebuild tab in Management View.
4. Select the physical drive to use in the rebuild.
Available drives have a black frame. Selected drives have a red frame.
5. Click the Start Now button.
You can monitor Rebuild progress on the Logical Drive Rebuild tab.
Click the respective buttons to pause and resume the Rebuild.