User Manual
Table Of Contents
- ROMB User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Installing Drivers
- Chapter 4: RAID Management Utility
- Chapter 5: WebPAM
- Logging into WebPAM
- Logging out of WebPAM
- Managing Users
- Viewing Host Management
- Making Utility Configuration Settings
- Managing the Controller
- Managing Physical Drives
- Managing Logical Drives
- Viewing All Logical Drives
- Creating a Logical Drive
- Creating a JBOD Disk
- Deleting a Logical Drive or JBOD Disk
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing a Logical Drive
- Viewing Logical Drive Initialization
- Activating a Logical Drive
- Responding to a Critical or Offline Logical Drive
- Managing Spare Drives
- Chapter 6: Technology
- Chapter 7: Support
- Appendix A: Partition and Format
- Appendix B: Upgrades
- Index
Software ROMB User Manual
74
Before you can use your new logical drive, you must partition and format the
logical drive using your PC’s operating system.
Creating a JBOD Disk
With Software ROMB, a JBOD disk is one or more physical drives that function
independently. There is no concatenation among multiple JBOD disks.
If you attach a physical drive that was initialized using Windows disk
management, that drive will be automatically recognized as a JBOD by the RAID
controller and WebPAM.
To create a new JBOD:
1. Click the Logical Drive View icon.
2. Click the Create tab.
The Select RAID Level screen appears.