User Manual
Table Of Contents
- ROMB User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Installing Drivers
- Chapter 4: RAID Management Utility
- Chapter 5: WebPAM
- Logging into WebPAM
- Logging out of WebPAM
- Managing Users
- Viewing Host Management
- Making Utility Configuration Settings
- Managing the Controller
- Managing Physical Drives
- Managing Logical Drives
- Viewing All Logical Drives
- Creating a Logical Drive
- Creating a JBOD Disk
- Deleting a Logical Drive or JBOD Disk
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing a Logical Drive
- Viewing Logical Drive Initialization
- Activating a Logical Drive
- Responding to a Critical or Offline Logical Drive
- Managing Spare Drives
- Chapter 6: Technology
- Chapter 7: Support
- Appendix A: Partition and Format
- Appendix B: Upgrades
- Index
Chapter 5: WebPAM
65
Viewing Physical Drive Information
To view information about a physical drive:
1. Click the Physical Drive View icon in Tree View.
2. Click the Physical Drive icon.
The information tab displays the following information:
• Drive Model – The physical (disk) drive manufacturer’s model name or
number.
• Serial Number – The serial number of this physical drive.
• Firmware Version – Version of the firmware on this physical drive.
• Port Number – The motherboard port to which this physical drive is
attached.
•Target ID – The SCSI target number of this physical drive.
• Drive Status – The operational of this physical drive. Functional means
normal. The alternative status is Offline.
• Background Activity – The current background activity affecting this
physical drive. Idle means no activity. Others include Patrolling, Patrol
Aborted, Patrol Paused, and Patrol Auto Paused.
• Capacity – The data capacity of this physical drive in GB.
•
Interface
– Identifies whether the physical drive is SATA 1.5 Gb/s or 3.0 Gb/s.