User Manual
Table Of Contents
- ROMB User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Installing Drivers
- Chapter 4: RAID Management Utility
- Chapter 5: WebPAM
- Logging into WebPAM
- Logging out of WebPAM
- Managing Users
- Viewing Host Management
- Making Utility Configuration Settings
- Managing the Controller
- Managing Physical Drives
- Managing Logical Drives
- Viewing All Logical Drives
- Creating a Logical Drive
- Creating a JBOD Disk
- Deleting a Logical Drive or JBOD Disk
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing a Logical Drive
- Viewing Logical Drive Initialization
- Activating a Logical Drive
- Responding to a Critical or Offline Logical Drive
- Managing Spare Drives
- Chapter 6: Technology
- Chapter 7: Support
- Appendix A: Partition and Format
- Appendix B: Upgrades
- Index
22
Software ROMB User Manual
SuSE Linux Enterprise Server
New OS Installation
1. Start the SuSE Linux Installation by booting from the install CD.
2. As the system boots, press F5 for the Driver Disk.
3. Move the cursor to the
Installation –
in boot option, type
"brokenmodules=ahci apic=bigsmp acpi=off" and then press Enter.
4. When the installer displays, “Please insert the Driver Update floppy/
CDROM,” insert the ROMB driver disk, then press Enter.
5. When the Driver Update Menu pops up, click
OK
, then click
Back
to return
to the installer.
6. Follow the on-screen prompts to complete the installation.
7. Please type "acpi=on" in boot option for every succeeds booting or add it into
/boot/grub/menu.lst.
8. Please do read readme document in driver package before install OS.
Existing System
1. Insert the ROMB driver diskette into the floppy drive.
2. Log in as
root
.
3. Type
mount /dev/fd0 /media/floppy
.
4. Type
cd /med
.
ia/floppy
5. Type
./install
6. Type
cd
.
.
7. Type
umount /media/floppy
8. Remove the ROMB driver diskette.
9. Type
reboot
to restart the system.