User Manual

Chapter 3: Installing Drivers
17
Existing System
After installing the ROMB software and rebooting your system, Windows Server
2008 setup will show a “Found New Hardware” dialog box.
1. Choose the Locate and install driver software option and click the Next
button.
The “Found New Hardware – RAID Controller” dialog box displays the
message: “Allow Windows to search online for driver software for your RAID
Controller?”
2. Choose the Don’t search online option.
The “Found New Hardware – RAID Controller” dialog box displays the
message: “Insert the disc that came with your RAID Controller.”
3. Insert the driver diskette into the floppy drive, or attach a USB memory stick
with the ROMB driver to the USB port, and click the Next button.
Windows loads the driver and displays the “Found New Hardware” dialog
box with message: “Windows has finished installing the driver software for
this device Promise ROMB Controller.”
4. Click the Close button to finish driver installation.
Confirming Driver Installation
1. Right-click the My Computer icon and choose Manage from the popup
menu.
2. From the left panel, choose Device Manager.
3. Click the + in front of Storage controllers. “Promise ROMB Controller” and
“Promise Raid Console” should appear.