User Manual
Table Of Contents
- ROMB User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Installing Drivers
- Chapter 4: RAID Management Utility
- Chapter 5: WebPAM
- Logging into WebPAM
- Logging out of WebPAM
- Managing Users
- Viewing Host Management
- Making Utility Configuration Settings
- Managing the Controller
- Managing Physical Drives
- Managing Logical Drives
- Viewing All Logical Drives
- Creating a Logical Drive
- Creating a JBOD Disk
- Deleting a Logical Drive or JBOD Disk
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing a Logical Drive
- Viewing Logical Drive Initialization
- Activating a Logical Drive
- Responding to a Critical or Offline Logical Drive
- Managing Spare Drives
- Chapter 6: Technology
- Chapter 7: Support
- Appendix A: Partition and Format
- Appendix B: Upgrades
- Index
Chapter 3: Installing Drivers
15
ROMB Driver Medium for Linux
Choose a medium that your PC supports: a blank diskette, a writable CD, or a
USB memory stick.
To prepare a driver diskette, CD, or USB stick for Linux:
1. Go to the Promise website and locate the driver package for your system.
http://www.promise.com/support/support_eng.asp
2. Manually copy the driver .tgz file to your PC’s hard drive.
3. Open a terminal window and untar the driver file. Below is an example:
tar zxvf SLES-11-X86_64.tgz
4. Insert the diskette or CD, or attach the USB stick to your PC.
5. Copy the driver file to the diskette, CD, or USB stick.
6. Check the driver’s ReadMe file for important information.