User Manual

5
Chapter 2: Installation
• Installing WebPAM (page 5)
Installing WebPAM
WebPAM RAID management software is an integral part of the Software RAID
On Mother Board (ROMB) system.
Before you proceed with installation, take a moment to verify that your operating
system and browser support WebPAM.
Operating System Support
On the Host PC where the Software ROMB is installed, Promise Technology
recommends:
• Windows Server 2008 R2 (64 bit)
• Windows Server 2008 (32 or 64 bit)
• Windows Server 2003 SP2 (32 or 64 bit)
• Windows Home Server (32 bit)
• Red Hat Enterprise Linux 5.4 (32 or 64 bit)
• Red Hat Enterprise Linux 4.8 (32 or 64 bit)
• SuSE Linux Enterprise Server 11 (32 or 64 bit)
• SuSE Linux Enterprise Server 10 SP3 (32 or 64 bit)
WebPAM supports these operating systems. Choose one of them to take full
advantage of all the features of WebPAM.
Browser Support
On the Host PC where the Software ROMB is installed, Promise Technology
recommends:
• Internet Explorer 6.0 or later
• Firefox 2.0 or later
If you do not have one of the above browsers, install the browser first and make it
the default browser. Then install WebPAM.