Computer Hardware User Manual

2-20 Chapter 2: BIOS Information
OnBoard ACʼ97 Audio [Enabled]
Selecting [Enabled] allows the BIOS to detect whether you are using any
audio device. If an audio device is detected, the onboard audio controller
is enabled . I f no aud io de vi ce is detecte d, th e c on troller is di sa bled.
Configuration options: [Enabled] [Disabled]
OnChip SATA [Enabled]
Enables or disables the OnChip Serial ATA. Configuration options: [Enabled] [Disabled]
OnChip SATA BOOTROM [Enabled]
Enables or disables the Serial ATA Boot ROM. Configuration options: [Enabled] [Disabled]
OnBoard SATA-IDE [RAID]
Allows you to set the mode of the OnBoard SATA-IDE mode. Configuration options:
[RAID] [SATA]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration options:
[Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN Boot ROM. Configuration options:
[Disabled] [Enabled]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address. Configuration options:
[Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel port base addresses. Configuration options:
[Disabled] [378] [278] [3BC]
Parallel Port Mode [Bi-Directional]
Allows you to select the Parallel port mode. Configuration options: [Normal] [Bi-
Directional] [EPP] [ECP]
Parallel Port IRQ [IRQ7]
Allows you to select the Parallel Port IRQ. Configuration options: [IRQ5] [IRQ7]