User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Motherboard information
- Chapter 3 BIOS setup
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Redirection
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Device Configuration
- 3.3.13 APM Configuration
- 3.3.14 Watchdog Timer
- 3.3.15 EZ-Flash
- 3.3.16 LVDS Configuration
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
1-3
Chapter 1: Product Overview
Internal
Connectors
2 x USB 2.0 headers support additional 4 USB 2.0 ports
1 x 8-bit GPIO header
1 x COM Debug header
1 x 4-pin ATX 12V power connector
1 x SATA power connector
1 x SATA port
1 x PS/2 port
1 x Speaker header
1 x eDP connector (optional)
1 x SPI TPM header
1 x AT/ATX selection header
1 x LVDS signal header
1 x LCD panel monitor switch header
1 x LVDS Panel VCC Power Selection jumper
1 x LVDS Panel Backlight Enable Signal Selection
1 x LVDS Backlight Panel header
Power
requirement
12V DC-in (1x external DC jack; 1 x internal 4-pin power
connector)
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative
Humidity
0%~85%
OS support
Windows
®
10 (64bit) / Windows
®
10 IoT Enterprise
Ubuntu, RedHat Enterprise, OpenSUSE
Form Factor Thin Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm)
NOTE: Specications are subject to change without notice.