User Manual

3-10
J6412T-IM-A
3.3.13 APM Configuration
ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss
[S5 State] The system goes into off state after an AC power loss.
[S0 State] The system goes into on state after an AC power loss.
Power On By PCIE
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled]
[Enabled]
Power On By PS2
[Disabled] Disables the PS2 devices to generate a wake event.
[Enabled] Enables the PS2 devices to generate a wake event.
Power On By Ring
[Disabled] Disables the Ring devices to generate a wake event.
[Enabled] Enables the Ring devices to generate a wake event.
Power On By RTC
Allows you to set your system to power up to execute tasks on a set schedule or
on a particular day. Conguration options: [Disabled] [Single event] [Daily event]
[Weekly event] [Monthly event]
3.3.14 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Configuration options:
[Disabled] [Enabled]
The following items appear only when you set the previous item to [Enabled].
Watchdog Count Mode
This item allows you to select a Watchdog timer I count mode.
Configuration options: [Second Mode] [Minute Mode]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly.
The value ranges from 1 to 255.