User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Motherboard information
- Chapter 3 BIOS setup
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Redirection
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Device Configuration
- 3.3.13 APM Configuration
- 3.3.14 Watchdog Timer
- 3.3.15 EZ-Flash
- 3.3.16 LVDS Configuration
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
J6412T-IM-A
2-22
21. SPI TPM header (14-1 pin TPM)
This header supports a Trusted Platform Module (TPM) system with a
Serial Peripheral Interface (SPI), allowing you to securely store keys, digital
certicates, passwords, and data. A TPM system also helps enhance network
security, protects digital identities, and ensures platform integrity.
PIN 1
T_SPI_HOLD#
T_SPI_MISO
S_SPI_CS0#
+3VSB_SPI
NC
S_PLTRST#
+VCC_SPI_TPM
T_SPI_MOSI
T_SPI_CLK
GND
T_SPI_BIOS_WP#
S_SPI_TPM_CS2#
S_SPI_TPM_IRQ#
SPI_TPM
Connector type
Header 2x7p, K14, 2.0mm pitch
22. SD card slot (SD_CARD)
This SD card slot allows you to install an SD card.
Disconnect all power (including redundant PSUs) from the existing system
before you add or remove a memory card, then reboot the system to access the
memory card.
Some memory cards may not be compatible with your motherboard. Ensure
that you use only compatible memory cards to prevent loss of data, damage to
your device, or memory card, or both.
SD_CARD
(BOTTOM)