User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Motherboard information
- Chapter 3 BIOS setup
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Redirection
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Device Configuration
- 3.3.13 APM Configuration
- 3.3.14 Watchdog Timer
- 3.3.15 EZ-Flash
- 3.3.16 LVDS Configuration
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
J6412T-IM-A
2-10
2.6 Connectors
2.6.1 Rear panel connectors
5 1
4
6
2 3 7
1. DC power connector. Insert the power adapter into this port.
2. DisplayPort port. This port connects a device with DisplayPort connector.
3. HDMI
™
port. This port is for a High-Definition Multimedia Interface
(HDMI
™
) connector, and is HDCP compliant allowing playback of HD DVD,
Blu-Ray, and other protected content.
4. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub.
LAN port LED indications
LAN port
Speed
LED
Activity Link
LED
Activity/Link LED Speed LED
Status Description Status Description
Off No link OFF 10Mbps connection
Yellow Linked ORANGE 100Mbps connection
Yellow (Blinking) Data activity GREEN 1Gbps connection
Yellow (Blinking
then steady)
Ready to wake
up from S5 mode
5. USB 3.2 Gen 2 (up to 10Gbps) ports. These 9-pin Universal Serial Bus
(USB) ports are for USB 3.2 Gen 2 devices.
6. USB 2.0 port. This Universal Serial Bus (USB) ports is for a USB 2.0 device.
7. Audio port. This port connects to an audio device.