User Manual

3-14
J6412T-IM-A
3.6 Boot menu
The Boot menu items allow you to change the system boot options.
BootConguration
CHASSIS INTRUDE
Allows you to enable or disable the chassis intrusion detection function.
Configuration options: [Disabled] [Enabled]
Setup Prompt Timeout
Allows you to set the number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting. Configuration options: [1] - [65535]
Bootup NumLock State
[On] Set the power-on state of the NumLock to [On].
[Off] Set the power-on state of the NumLock to [Off].
Quiet Boot
Allows you to enable or disable the Quiet Boot option.
Configuration options: [Disabled] [Enabled]
Fast Boot
[Disabled] Select to go back to normal boot.
[Enabled] Select to accelerate the boot speed.
FIXED BOOT ORDER Priorities
Boot Option #1~#6
This item allows you to set the system boot order for available devices. The
number of device items that appears on the screen depends on the number of
devices installed in the system.
3.7 Exit menu
The Exit menu items allow you to save or discard your changes to the BIOS items.
Save Changes & Exit
This option allows you to save your changes and exit the Setup program. When
you select this option or if you press <Esc>, a confirmation window appears. Select
Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes.
When you select this option or if you press <Esc>, a confirmation window appears.
Select Yes to discard changes and exit.