User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Redirection
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Device Configuration
- 3.3.13 APM Configuration
- 3.3.14 Watchdog Timer
- 3.3.15 EZ-Flash
- 3.3.16 LVDS Configuration
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-5
Chapter 3: BIOS setup
L1 Substates
This item allows you to select the PCI Express L1 Substate settings.
Configuration options: [Disabled] [L1.1] [L1.2] [L1.1 & L1.2]
PCIe Speed
Configures the speed of PCIEX16_2 slot. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Detect Timeout
This item allows you to set the number of milliseconds to wait before
assuming there is no device and potentially disabling the port. Use <+> and
<-> to adjust the value.
Hot Plug
These items allow you to enable/disable PCIEX16_2 slot Hot Plug support.
Configuration options: [Disabled] [Enabled]
Detect Non-Compliance Device
These items allow you to enable/disable detection of non-compliant PCI
express devices. Configuration options: [Disabled] [Enable]
3.3.6 Super IO Configuration
NCT6126D Super IO Configuration
Serial Port 1 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Enabled] [Disabled]
The following items appear only when you set the previous item to [Enabled].
COM1 Control
Allows you to select the COM1 mode. Configuration options: [RS232]
[RS422] [RS485]
Serial Port 2/3/4/5/6 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Disabled] [Enabled]