Specifications

1-4
Chapter 1: Product introduction
1.3 Central Processing Unit (CPU)
The motherboard comes with an onboard Intel
®
Celeron™ Dual-core Processor J1800 and a
specially designed CPU heatsink.
1.4 System memory
1.4.1 Overview
This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline
Memory Modules (SO-DIMM) sockets. The gure illustrates the location of the DDR3 DIMM
sockets:
Channel Sockets
Channel A DIMM_A1
Channel B DIMM_B1
J1800I-A
J1800I-A 204-pin DDR3 DIMM sockets
DIMM_A1
DIMM_B1
1.4.2 Memory congurations
You may install 512MB, 1GB, 2GB, 4GB and 8GB unbuffered non-ECC DDR3 SO-DIMMs
into the DIMM sockets.
Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or
less.
Using both memory channels is supported on this motherboard. When installing 2 SO-
DIMMs, use the same size and type of memory. The DIMM_A1 slot should be lled in
order for the motherboard to work properly.
This model supports a maximum total memory of of 8GB DDR3 1333 only. Memory
modules with a voltage higher than 1.35V will run at 1.35V. DDR3 1066Mhz memory
modules are not supported.