User's Manual

Single Board Computer 27
2.5 I/O connectors
Front panel
Front panel connectors
Power button
The power button allows you to turn the Single Board Computer on or o.
You can use the power button to put your Single Board Computer to sleep
mode or press it for ten (10) seconds to force shutdown your Single Board
Computer.
USB 3.2 Gen 1 Type-C® OTG port
This USB Type-C® OTG (Universal Serial Bus) port provides a transfer rate of up
to 5 Gbit/s, and provides a maximum of 5V/1.5A output. This port supports
OTG mode that can be taken to replace UART debug console.
LAN port
The Realtek® RTL8211 Ethernet controllers with 8-pin RJ-45 LAN port
supports a standard Ethernet cable for 10/100/1000 Mbps connection to a
local network.
LAN port
The Intel® I211-AT Gigabit Ethernet controllers with 8-pin RJ-45 LAN port
supports a standard Ethernet cable for 10/100/1000 Mbps connection to a
local network.
HDMI™ port
The integrated 19-pin HDMI (High Denition Multimedia Interface) 2.0 port
with a receptacle connector can support resolutions up to 3840 x 2160 @ 60
Hz on external display devices.
USB 3.2 Gen 1 port
The USB 3.2 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5
Gbit/s.