E16472 First Edition / May 2020
First Edition/ May 2020 ASUS Phone (Mobile Phone) Model: A SUS_I003D (ZS661KS) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/.
Side & Rear features Microphone Microphone Rear cameras Nano SIM card slot Bumper RGB LED Camera flash AirTrigger touch sensor Nano SIM card tray eject hole Volume key Side Mount connector Power key Microphone NFC detection area Rear cover Aura light AirTrigger touch sensor Microphone USB Type-C port NOTES: • The USB Type-C port supports USB 2.0 transfer rate. The Side Mount connector Type-C port supports USB 3.1 Gen1 transfer rate. • Go to Settings > Advanced > AirTriggers to set AirTriggers.
AeroActive Cooler features Use the AeroActive Cooler to keep your ROG Phone working at a high frequency during heavy workloads by providing a better thermal solution, and offering the ultimate user experience. Fan Aura light Side mount connector cover storage USB Type-C port Audio jack NOTES: • Connect your AeroActive Cooler to the Side Mount connector of your ROG Phone.
NOTES: • It is not recommended that you connect other devices to your ROG Phone when you install the phone on the AeroActive Cooler. • Docking your ROG Phone on an accessory with fan(s) will impact the audio quality when making phone calls and recording. To use the kickstand of AeroActive Cooler: Open the kickstand on the back of the AeroActive Cooler to get optimal viewing experience. Charging your ROG Phone To charge your ROG Phone: 1. Connect the USB connector into the power adapter’s USB port. 2.
or 3 2 1 NOTES: • We recommend that you charge your ROG phone through one USB Type-C port at a time. • Only the Side Mount connector has Display Port functionality. • If you connect USB Type-C OTG or charging devices to both of the USB Type-C ports on your ROG phone, the Side Mount connector will become the master and the charging current or OTG device on the bottom port will be limited.
Installing a Nano SIM card To install a Nano SIM card: 1. Push a pin into the hole on the Nano SIM card tray to eject it. Insert the Nano SIM card(s) into the card slot(s). -SI no Na -SI no Na M1 M2 2. Push the tray to close it. NOTES: • Both Nano SIM card slots support GSM/GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+, FDD-LTE, TD-LTE, and 5G NR Sub-6 network bands. Both Nano SIM cards can connect to VoLTE 4G calling service, but only one can connect to 5G NR Sub-6 data service at a time.
Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit.
to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise. The Hearing Aid Compatibility rating is displayed on the wireless phone box. A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or “M4” rating.
Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng. Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/ smt-gst.nsf/eng/sf08792.html. This equipment should be installed and operated with minimum distance 15 mm between the radiator and your body.
Using GPS (Global Positioning System) on your ROG Phone To use the GPS positioning feature on your ROG Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.
• • • • • • • • • Do not remove the non-detachable Li-polymer battery as this will void the warranty. Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. Do not remove and replace the battery with a non-approved battery. Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device. Do not remove and soak the battery in water or any other liquid.
Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. General Usage (typical body-worn) (for Japan) This device (front & rear side) should be operated under a seperation distance of 15 mm from the human body.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for detailed recycling information in different regions.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
FCC COMPLIANCE INFORMATION Per FCC Part 2 Section 2.1077 Responsible Party: Address: Phone/Fax No: Asus Computer International 48720 Kato Rd, Fremont, CA 94538 (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Model Number : ASUS ROG Phone 3 ASUS_I003D compliance statement: This device complies with part 15 of the FCC Rules.
ASUS Address: 1F., No.15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ROG Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
15060-XXXXXXXX
