User guide

USB 3.0 HZ-2 Docking Station User Guide

English

Connecting to the Internet

UseanRJ-45cabletoconnectyourdockingstationtoalocalareanetwork(LAN)(A)ora

DSL/cablemodem(B).

ThegreenLEDontheLANportlightsupwhenthereisanInternetconnection.Theyellow

LEDlightsupwhenthereisInternetactivity.

• IfyoufailtoconnecttotheInternetusingthedockingstationatyourofce,checkwiththe

networkadministratoriftheMACaddressofthedockingstationisblockedbyyour

company'srewall.

• CheckthebottomofyourdockingstationforitsMACaddress.Youmayalsoobtainthe 

MACaddressthroughthefollowingways:

 1.FromtheWindows

desktop,clickStart > All Programs > Accessories > Command

Prompt.

2.Atthecommandprompt,keyinipcong/allandthenPress<Enter>.

3.LocateHighSpeed USB-Ethernet Adapter.

• TheRJ-45cableispurchasedseparately.

Modem

RJ-45

LAN