User guide

18
9.1.2 Switching from Super Speed mode to Normal mode
To switch from the Super Speed mode to the Normal mode:
1. From the Hyper Express Mode screen, click the Normal icon .
2. From the Initialize Disk window of the Windows Disk Management application, put
a check mark on Disk 0 from the Select disks pane, tick GPT (GUID Partition Table)
from the Use the following partition style for the selected disks:, then click OK to
initialize the disk.
3. When done, click OK.
4. Format the disk to complete the initialization.
To format the disk, perform either of the following:
• From Windows Explorer, right-click on the disk that you want to format, select
Format then click Start.
• From Windows Disk Management, right-click on the disk that you want to format,
select Format then click OK.