User Manual
ASUS H81T R2.0
2-25
Aggressive LPM Support [Auto]
This item appears only when you set SATA Mode Selection to [AHCI] and allows you to
enable or disable PCH entering link power state aggressively. Conguration options: [Auto]
[Disabled] [Enabled]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self‑Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Conguration options: [Enabled] [Disabled]
mSATA_mPCIe Detection [Auto]
This item detects when an mSATA card or mPCIe card is installed in the mSATA/mPCIe
combo slot. Conguration options: [Auto] [mSATA only]
Hot Plug [Disabled]
These items appear only when you set the SATA Mode Selection item to [AHCI] and allow
you to enable/disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]
2.6.5 System Agent Configuration
VT-d [Disabled]
Allows you to enable or disable VT‑d function on MCH. Conguration options: [Enabled]
[Disabled]
CPU Audio Device [Enabled]
Allows you to enable or disable CPU SA Audio Device. Conguration options: [Enabled]
[Disabled]
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
iGPU Memory [Auto]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU. Conguration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M]
[256M] [288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
Render Standby [Auto]
Allows you to enable or disable Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle. Conguration options: [Auto] [Disabled]
[Enabled]
IGD Flat Panel [Auto]
Allows you to enable or disable IGD video output to onboard LVDS. Conguration
options: [Disable] [LVDS]