Specifications

ASUS H81M-C R2.0
2-29
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).
Configuration options: [Enabled] [Disabled]
The following items appear only when you set the Parallel Port Configuration item to [Enabled].
Change Settings [Auto]
Allows you to select an optimal setting for Super I/O devices. Configuration options:
[Auto][IO=378h;IRQ=5;][IO=378h;IRQ=5,6,7,9,10,11,12;][IO=278h;IRQ=5,6,7,9,10,11,12;]
[IO=3BCh;IRQ=5,6,7,9,10,11,12;]
Device Mode [STD Printe...]
AllowsyoutoselectthePrinterPortmode.Congurationoptions:[STDPrinterMode][SPP
Mode][EPP-1.9andSPPMode][EPP-1.7andSPPMode][ECPMode][ECPandEPP1.9Mode]
[ECPandEPP1.7Mode]
2.6.8 APM
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was before
the AC power loss.
Power On By PCIE/PCI [Disabled]
[Disabled] DisablesthePCIE/PCIdevicestogenerateawake-on-LANfeatureoftheIntel
®
/
RealtekLANdevice.
[Enabled] EnablesthePCIE/PCIdevicestogenerateawake-on-LANfeatureoftheIntel
®
/
RealtekLANdevice.
Power On By Ring [Disabled]
[Disabled] Disables Ring to generate a wake event.
[Enabled] Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/
Second will become user-configurable with set values.