Specifications

2-18
Chapter 2: BIOS information
Turbo Mode [Enabled]
Allows you to enable your core processor’s speed to run faster than the marked frequency in a
specific condition. Configuration options: [Disabled] [Enabled]
• TurboModeisonlyavailableonselectedCPUmodelsonly.
• ThefollowingrstthreeitemsappearonlywhenyousettheTurboModeto[Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration package power.
Usethe<+>and<->keystoadjustthevalue.
Package Power Time Window [Auto]
Allows you to set the package power time window.
Usethe<+>and<->keystoadjustthevalue.
Short Duration Package Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power.
Usethe<+>and<->keystoadjustthevalue.
CPU Integrated VR Current Limit [Auto]
Allows you to limit the CPU Integrated VR current
Use<+>and<->keytoadjustthevalue.
CPU Internal Power Switching Frequency
Frequency Tuning Mode [Auto]
Allows you to set the frequency tuning mode. Configuration options: [Auto] [+]
[-]
CPU Internal Power Fault Control
Thermal Feedback [Auto]
When enabled, it allows CPU to take precautionary actions when the thermal of
the external regulator exceeds the limit.Configuration options: [Auto] [Disabled]
[Enabled]
CPU Integrated VR Fault Management [Auto]
Allows you to manage the CPU Integrated VR fault. Configuration options: [Auto]
[Disabled] [Enabled]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
Allows you to manage the CPU integrated VR efficiency. Configuration options:
[Auto] [High Performance] [Balanced]
Power Decay Mode [Auto]
Enable to improve power saving on the Fully Integrated Voltage Regulator as
the processor enters low current mode. Configuration options: [Auto] [Disabled]
[Enabled]
Idle Power-in Response [Auto]
Allows you to set the idle power-in response. Configuration options: [Auto] [Regular] [Fast]
Idle Power-out Response [Auto]
Allows you to set the idle power-out response. Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
Allows you to set the power current slope. Configuration options: [Auto] [Level -4] ~ [Level 4].