Specifications

2-18
Chapter 2: BIOS information
Render Standby [Enabled]
Allows you to enable the Intel
®
Graphics Render Standby support to reduce the iGPU power
usewhenidle.Congurationoptions:[Disabled][Enabled]
iGPU Multi-Monitor [Disabled]
AllowsyoutoenabletheiGPUMulti-Monitor.ForLucidVirtuMVPfunctionsupports,setthis
item to [Enabled] to empower both integrated and discrete graphics. iGPU shared system
memory size is fixed in 64MB.
Congurationoptions:[Disabled][Enabled]
2.5.5 USB Configuration
The items in this menu allow you to change the USB-related features.
TheUSBDevicesitemshowstheauto-detectedvalues.IfnoUSBdeviceisdetected,theitem
shows None.
Intel USB2.0 EHCI Controller [Enabled]
[Disabled] DisablestheIntelUSB2.0EHCIcontroller.
[Enabled] EnablestheIntelUSB2.0EHCIcontroller.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] TheUSBdevicescanbeusedonlyfortheBIOSsetupprogram.
[Auto] Allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the
legacy USB support is disabled.
EHCI Hand-off [Disabled]
[Enabled] EnablesthesupportforoperatingsystemswithoutanEHCIhand-ofeature.
[Disabled] Disablesthefunction.
USB Single Port Control
USB1~6 [Enabled]
Allows you to enable or disable an individual USB port. Refer to the section 1.3.3
Motherboard layout in this user manual for the locations of the USB ports.
The USB port numbers may not be arranged in a consecutive order.