User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Configuration
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 APM Configuration
- 3.3.14 EzFlash
- 3.3.14 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
1-3
Chapter 1: General information
Internal I/O
connectors
1 x CPU Fan header (PWM mode)
1 x Chassis Fan header (PWM mode)
1 x Chassis intrusion header
1 x Front Panel Audio header (AAFP)
1 x System Panel header
1 x Clear CMOS header
1 x Speaker header
1 x GPIO header (8-bit)
1 x AT/ATX mode selection jumper
1 x PS/2 Keyboard/Mouse header
1 x 24-pin ATX power connector
1 x 8-pin ATX power connector
1 x SPI TPM header
1 x I
2
C header
Watch dog timer
Yes
Power
requirement
AT/ATX mode
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity
10%~95% (non-coagulation)
OS support
Windows
®
10 (64bit )
Windows
®
10 IoT Enterprise
Ubuntu
RedHat Enterprise
Fedora Workstation
OpenSUSE
Certification
CE, FCC
Form Factor
micro-ATX Form Factor, 9.6”x 9.6” (24.4cm x 24.4cm)
NOTE: Specications are subject to change without notice.