User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EzFlash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-12
H610A-IM-A
USB5-9, 14
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
3.3.12 NVMe Configuration
The NVMe Conguration menu displays the NVMe controller and drive information
of the devices connected and allows you to congure NVMe device options
settings.
3.3.13 Onboard Devices Configuration
HD Audio
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
LAN1 I210AT
[Enabled] Enables the Intel LAN1 controller.
[Disabled] Disables the controller.
LAN2 I219V
[Enabled] Enables the Intel LAN2 controller.
[Disabled] Disables the controller.
M.2 Key
PCIE Port
[Enabled] Enables the PCIE port.
[Disabled] Disables the PCIE port.
I2C Controller
[Enabled] Enables the I2C controller.
[Disabled] Disables the I2C controller.
3.3.14 Miscellaneous
DMI/OPI Configuration
DMI LINK ASPM Control
This item allows you to control the Active State Power Management on SA side
of the DMI Link. Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1]
[ASPM L0sL1]
PCI Express Configuration
DMI Link ASPM Control
This item allows you to control the Active State Power Management of the DMI
Link. Conguration options: [Disabled] [L1] [Auto]