Configuration Guide

• 8 ~ 13 mining cards
1. InstallyourminingcardsintotheconnectorslabeledAxxandBxxinsequentialorder
A01~B13.
2. Connectyourpowersupplyunit(PSU)tothe24-pinEATXpowerconnectorslabeled
EATXPWR_AandEATXPWR_B.
EATXPWR_AEATXPWR_B
PCIEX16
A01 A02 A03 A04
A05 A06 A07
B08 B11
B09 B12
B10 B13
A01
Tomakethepowerconsumptioninbalance,connectthe6-pin/8-pinpowerconnectorsofyour
miningcardsinareaAtothepowersupplyunit(PSU)pluggedinEATXPWR_A,andminingcards
inareaBtothepowersupplyunit(PSU)pluggedinEATXPWR_B.
• 14 ~ 20 mining cards
1. InstallyourminingcardsintotheconnectorslabeledAxx,Bxx,Cxxinsequentialorder
A01~C20.
2. Connectyourpowersupplyunit(PSU)to24-pinEATXpowerconnectorslabeled
EATXPWR_A,EATXPWR_B andEATXPWR_C.
EATXPWR_AEATXPWR_BEATXPWR_C
PCIEX16
A01 A02 A03 A04
A05 A06 A07
B08 B11
B09 B12
B10 B13
C17
C14 C18
C15 C19
C16 C20
A01
Tomakethepowerconsumptioninbalance,connectthe6-pin/8-pinpowerconnectorsofyour
miningcardsinareaAtothepowersupplyunit(PSU)pluggedinEATXPWR_A,miningcardsin
areaBtothepowersupplyunit(PSU)pluggedinEATXPWR_B,andminingcardsinareaCtothe
powersupplyunit(PSU)pluggedinEATXPWR_C.
Customizing server and PC’s power supplies for mining
Youcancombineaserver’sandadesktopPC’spowersupplyformining,takeamotherboardwith
twenty(20)connectorsforminingGraphicscards
forexample:
1. Prepareacustomized2400Wpowersupply
andanordinary1200Wpowersupply.
2. Connectthe2400Wpowersupplyto
EATXPWR_Aconnectorasthemainpower
supplyforthesystemandGraphicscards.
3. Connecttwelve(12)Graphicscardsto
the2400Wpowersupplyandinsertthe
twelve(12)cardsintotheverticalUSBports
separately.
EATXPWR_AEATXPWR_BEATXPWR_C
PCIEX16
A01 A02 A03 A04
A05 A06 A07
B08 B11
B09 B12
B10 B13
C17
C14 C18
C15 C19
C16 C20
A01
4. Connectthe1200Wpowersupplytothe
EATXPWR_BorEATXPWR_Cconnector.
5. Connecttheresteight(8)Graphicscardsto
the1200Wpowersupplyandinsertedthemto
theresteight(8)verticalUSBports.
EATXPWR_AEATXPWR_BEATXPWR_C
PCIEX16
A01 A02 A03 A04
A05 A06 A07
B08 B11
B09 B12
B10 B13
C17
C14 C18
C15 C19
C16 C20
A01
WhenaGPUisinstalledonaUSBA1port,
thePCIEx16slotcannotbeused.
Changing the mining mode in BIOS
To change the mining mode in BIOS:
1. Press<Delete>or<F2>duringPOSTto
enterBIOSSetup.
2. GototheAdvancedmenu>Mining
Mode.Thisitemissetto[Enabled]by
default.Youcanchangethisitemby
yourself.
Viewing the mining card status
To view the mining card status in BIOS:
1. Press<Delete>or<F2>duringPOSTto
enterBIOSSetup.
2. GototheAdvancedmenu>On Board
Slot States,thenpress<Enter>todisplay
thestatusoftheexpansioncards.
To view the mining card status during POST:
AnimageappearsduringPOSTtodisplay
thestatusoftheminingcards.
• Greenslot:Theminingcardworks
normally.
• Redslot:Thereisanerrorwiththe
miningcard.
• Grayslot:Yoursystemfailedto
detecttheminingcard.
Working
Error
None
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
E14471_Mining_Configuration_Guide.indd 2 2018-07-03 15:46:01