User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 PCI Subsystem Settings
- 3.4.10 USB Configuration
- 3.4.11 Network Stack Configuration
- 3.4.12 NVMe Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-20
H310M-IM-A
Primary Display. Conguration options: [Auto] [CPU Graphics] [PCIE] [PEG]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. Set this item to [Enabled] to
empower both integrated and discrete graphics. The iGPU shared system
memory size will be xed at 64MB. Conguration options: [Disabled]
[Enabled]
DVMT Pre-Allocated [64M]
Allows you to select DVMT 5.0 Pre_Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device. Conguration options: [32M] [64M]
[96M] ~ [1024M]
RC6(Render Standby) [Auto]
Allows you to enable or disable render standby support. Conguration
options: [Disabled] [Auto]
PEG Port Configuration
Allows you to congure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to congure the PCIEX16_1 speed. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
3.4.4 PCH Configuration
PCI Express Configuration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Conguration options: [Disabled] [Enabled]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Conguration options: [Disabled] [Enabled]
System Time and Alarm Source [ACPI Time and Alarm Device]
Allows you to select source of system time and alarm functions.
Conguration options: [ACPI Time and Alarm Device] [Legacy RTC]
3.4.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the