User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 PCI Subsystem Settings
- 3.4.10 USB Configuration
- 3.4.11 Network Stack Configuration
- 3.4.12 NVMe Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-13
Chapter 3: BIOS setup
3.3.7 DIGI+ VRM
CPU Load-line Calibration
Load-line is dened by Intel
®
specication and affects CPU power voltage.
The CPU working voltage decreases proportionally to CPU loading. Higher
load-line calibration could get higher voltage and good overclocking
performance, but increases the CPU and VRM thermal conditions. Select
from levels 1 to 7 to adjust the load-line slope.
Conguration options [Auto] [Default] [Level 1] - [Level 7]
The actual performance boost may vary depending on your CPU specication.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Phase Control
This item allows you to set the power phase control of the CPU.
[Auto] Automatically set the phase control mode.
[Standard] The phase control will be based on the CPU command.
[Optimized] Set to the ASUS optimized phase tuning prole.
[Extreme] Set to the full phase mode.
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU VRM Thermal Control
This item allows you to adjust the temperature limit of the CPU VRM.
Conguration options: [Atuo] [Enabled] [Disabled]
CPU Graphics Load-Line Calibration
Load-line is dened by Intel VRM specication and affects the GT power voltage. The GT
working voltage will decrease proportionally depending on the GT loading. Higher levels of
the load-line calibration can get a higher voltage and a better overclocking performance but
increases the GT and VRM thermal. Select from level 1 to 7 to adjust the GT power voltage
from 0% to 100%. Conguration options: [Auto] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
[Level 6] [Level 7]
The boosted performance may vary depending on the GT specication. Do not remove the
thermal module.