User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 PCI Subsystem Settings
- 3.4.10 USB Configuration
- 3.4.11 Network Stack Configuration
- 3.4.12 NVMe Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
2-15
Chapter 2: Motherboard information
CAUTION! Never connect a 1394 cable to the USB connector. Doing so will
damage the motherboard.
NOTE: The USB cable is purchased separately.
3. USB 2.0 connector (10-pin USB914)
This connector is for USB 2.0 port. Connect the USB cable to this connector.
This USB connector comply with USB 2.0 specication that supports up to
480 Mbps connection speed.
H310M-IM-A USB2.0 connector
USB914
PIN 1
USB+5V
USB_P9-
USB_P9+
GND
NC
USB+5V
USB_P14-
USB_P14+
GND
4. Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
H310M-IM-A SPEAKER connector
+5V
GND
GND
SPKO
SPEAKER
PIN 1