User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 PCI Subsystem Settings
- 3.4.10 USB Configuration
- 3.4.11 Network Stack Configuration
- 3.4.12 NVMe Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
2-3
Chapter 2: Motherboard information
Connectors/Jumpers/Slots
Page
1. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 2-19
2. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) 2-16
3. Intel
®
LGA1151 CPU socket 2-4
4. M.2 socket 3 2-18
5. DDR4 DIMM slots 2-9
6. USB 3.2 Gen 1 connector (20-1 pin U32G1_12) 2-14
7. Clear RTC RAM (2-pin CLRTC) 2-11
8. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1-4) 2-20
9. Speaker connector (4-pin SPEAKER) 2-15
10. System panel connector (10-1 pin F_PANEL) 2-17
11. USB 2.0 connector (10-pin USB914) 2-15
12. TPM connector (14-1 pin TPM) 2-14
13. LPC debug header 2-16
14. LPT connector 2-20
15. Chassis Intrusion header 2-11
16. Serial port connector (10-1 pin COM2) 2-18
17. Front panel audio connector (10-1 pin AAFP) 2-19