User's Manual

2-17
Chapter 2: Motherboard information
CAUTION! Never connect a 1394 cable to the USB connector. Doing so will
damage the motherboard.
NOTE: The USB cable is purchased separately.
3. USB 2.0 connector (10-pin USB78)
This connector is for an USB 2.0 port. Connect the USB cable to this
connector. This USB connector complies with USB 2.0 specication that
supports up to 480 Mbps connection speed.
H310I-IM-B USB2.0 connector
USB78
PIN 1
USB+5V USB_P7- USB_P7+ GND NC
USB+5V
USB_P8-
USB_P8+
GND
4. General purpose input/output connector (GPIO_CON)
This connector is for a general purpose input/output module which allows you
to customize the digital signal input/output.
H310I-IM-B GPIO connector
+5VSB
GPIO7
GPIO5
GPIO3
GPIO1
GND
GPIO8
GPIO6
GPIO4
GPIO2
GPIO_CON
PIN 1
Connector type Header 2x5p, K9, 2.54mm pitch
Connector type WAFER HD 2x5p, 2.0mm pitch, S/T