User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Start ASUS EzFlash
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 Platform Misc Configuration
- 3.3.5 CPU Configuration
- 3.3.6 System Agent (SA) Configuration
- 3.3.7 PCH Storage Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 ACPI Settings
- 3.3.10 LVDS Configuration
- 3.3.11 APM Configuration
- 3.3.12 NCT6116D Super IO Configuration
- 3.3.13 NCT6116D HW Monitor
- 3.3.14 Serial Port Console Redirection
- 3.3.15 USB Configuration
- 3.3.16 NVMe Configuration
- 3.3.17 HDD Secure Erase
- 3.3.18 Dynamic Digital IO
- 3.3.19 Network Stack Configuration
- 3.4 Security menu
- 3.5 Boot menu
- 3.6 Save & Exit menu
- 3.7 Event Logs
- BIOS setup
- Appendix
2-23
Chapter 2: Motherboard information
NOTE: The serial port cables are purchased separately.
16. Serial port connectors (10-pin COM2, COM3, COM4)
These connectors are for serial (COM) ports. Connect the serial port cables
to these connectors, then install the module to a slot opening at the back of
the system chassis.
H310I-IM-B Serial port (COM) connectors
COM2、COM3、COM4
PIN 1
DCD#
TXD
GND
RTS#
Ring
RXD
DTR#
DSR#
CTS#
Connector type
BOX header 2x5p, K10, 2.0mm pitch
17. Flat panel display brightness connector (6-pin LCD_BLKT_PANEL)
This connector is for the LCD panel brightness controls.
H310I-IM-B Inverter connector
LCD_BLKT_PANEL
PIN 1
BKL_PWR
BKL_PWR
LCD_ENABKLT_CN
LCD_BL_PWM_CN
GND
GND
Connector type
WAFER 6p, 2.0mm pitch