User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Start ASUS EzFlash
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 Platform Misc Configuration
- 3.3.5 CPU Configuration
- 3.3.6 System Agent (SA) Configuration
- 3.3.7 PCH Storage Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 ACPI Settings
- 3.3.10 LVDS Configuration
- 3.3.11 APM Configuration
- 3.3.12 NCT6116D Super IO Configuration
- 3.3.13 NCT6116D HW Monitor
- 3.3.14 Serial Port Console Redirection
- 3.3.15 USB Configuration
- 3.3.16 NVMe Configuration
- 3.3.17 HDD Secure Erase
- 3.3.18 Dynamic Digital IO
- 3.3.19 Network Stack Configuration
- 3.4 Security menu
- 3.5 Boot menu
- 3.6 Save & Exit menu
- 3.7 Event Logs
- BIOS setup
- Appendix
H310I-IM-B
2-12
6. Back Light power enable mode (BKLTEN_SEL)
Pins
1-2 (Default) High Active
2-3 Low Active
1 2
3
BKLTEN_SEL
H310I-IM-B Back Light
Power Enable mode jumper
5. WDT Enable jumper (2-pin WDT_EN)
A watchdog timer is an electronic timer that is used to detect and recover
from computer malfunctions. The HW WDT (watchdog timer) Enable jumper
allows the HW watchdog resets the system automatically even when the
system crashes.
H310I-IM-B HW WDT Enable jumper
WDT_EN
NOTE: By default, this jumper is set to HW WDT enabled with a jumper cap
attached.
Connector type
HEADER 1x2p, 2.54mm pitch, S/T
Connector type
HEADER 1x3p, 2.54mm pitch, S/T