User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Supper IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA Configuration
- 3.3.11 USB Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 APM Configuration
- 3.3.15 EZ-Flash
- 3.3.16 Watchdog Timer
- 3.3.17 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
1-3
Chapter 1: General information
Front panel I/O
ports
2 x USB 2.0 2-port connectors support additional 4 USB 2.0 ports
1 x USB 3.2 Gen 1 2-port connector supports additional 2 USB
3.2 Gen 1 ports
2 x SATA 6.0Gb/s connectors
1 x M.2 Socket 1 (Key E, 2230) for WIFI/BT device
1 x M.2 Socket 3 (Key M, 2242/2260/2280) for SSD
1 x Full/Half mini-PCIe with SATA
1 x CPU Fan connector
1 x Chassis Fan connector
1 x Front panel audio connector (AAFP)
1 x System panel connector
1 x Clear CMOS header
4 x COM headers (4 x RS232)
1 x SPI TPM header
1 x LPC Debug header
1 x Speaker connector
1 x 24-pin ATX power connector
1 x 4-pin ATX power connector
1 x LVDS connector
1 x LCD panel monitor switch header
1 x Display panel VCC power selector
1 x Flat panel display brightness connector
1 x AT/ATX mode selection header
GPIO 1 x 8-bit GPIO header
BIOS features
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 3.0, WfM 2.0, SM
BIOS 3.1, ACPI 6.1, Multi-language BIOS, ASUS EZ Flash 3,
Last Modied Log, ErP Ready, ASUS Self-Recovering BIOS,
ASUS Commercial Kit
Manageability WfM 2.0, DMI 2.0, WOL by PME
Watch dog timer Yes
Power
requirement
AT/ATX
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity 0%~85%
(continued on the next page)