User Manual

3-12
H310I-IM-A R3.0
3.3.14 APMConguration
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Enable] [Disabled]
Restore AC Power Loss
Allows you to select AC power state when power is re-applied after a power failure.
Conguration options: [S5 State] [S0 State]
Power On By PCIE
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCIe LAN cards.
Conguration options: [Disabled] [Enabled]
Power On By RTC
Allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and congure the RTC alarm date. When enabled, you can set the days,
hours, minutes, or seconds to schedule an RTC alarm date. Conguration options:
[Disabled] [Single event] [Daily event] [Weekly event] [Monthly event]
3.3.15 EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a
conrmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to conrm your choice.
3.3.16 Watchdog Timer
Watchdog Support
Conguration options: [Disabled] [Enabled]
The following items appear when you set Watchdog Support to [Enable].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode.
Conguration options: [Second Mode] [Minute Mode]
Watchdog Timer
Allows you to set the Watchdog Timer I Time-out value.
3.3.17 Miscellaneous
DMI/OPIConguration
PCIExpressConguration