User Manual

3-9
Chapter 3: BIOS setup
Conguration options: [None] [Hardware RTS/CTS]
VT-UTF8 Combo Key Support
Allows you to enable or disable VT-UTF8 Combination Key Support for ANSI/
VT100 terminals. Conguration options: [Disabled] [Enabled]
Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal
data. Conguration options: [Disabled] [Enabled]
Resolution 100x31
Allows you to enable or disable extended terminal resolution.
Conguration options: [Disabled] [Enabled]
Putty KeyPad
Allows you to select FunctionKey and KeyPad on Putty.
Conguration options: [VT100] [LINUX] [XTERMR6] [SCO] [ESCN] [VT400]
3.3.10 SATAConguration
This item allows you to congure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device.
Conguration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate. Conguration options:
[AHCI]
SATA6G_ 1(~2)
Port 1(~2)
Allows you to enable or disable SATA Port.
Conguration options: [Disabled] [Enabled]
Hot Plug
Allows you to designate this port as Hot Pluggable.
Conguration options: [Disabled] [Enabled]
M.2
Conguration options: [Disabled] [Enabled]
MSATA_MPCIE
Conguration options: [Disabled] [Enabled]